This website requires cookies to provide all of its features. By using our website, you agree to our use of cookies - Learn more - Hide this message

Boiler-m8 Ultimate Central Heating Water Treatment Part L Compliance Pack 22mm

SKU:
150-5010

Boiler-m8 Ultimate Central Heating Water Treatment Part L Compliance Pack 22mm

The Compliance Pack Contains:

  • Boiler m8 Defender-2 Magnetic System Filter with 22mm PN20 Isolating Valves
  • Boiler-m8 Air-Master Air-Separator & Auto Air-Vent 22mm
  • Boiler-m8 Neocal WRAs Approved Electrolytic Scale Reducer 15mm
  • Boiler m8 Buildcert/NSF Inhibitor Concentrate 500ml
  • Boiler m8 System Cleaner Concentrate 500ml
Availability : Instock
£109.97

Buy More & Save More

  • Buy 5 for £107.22 each and save 3%
  • Buy 10 for £104.47 each and save 5%
  • Buy 25 for £101.72 each and save 8%
 

Boiler-m8 Ultimate Central Heating Water Treatment Part L Compliance Pack 22mm

The Compliance Pack Contains:

  • Boiler m8 Defender-2 Magnetic System Filter with 22mm PN20 Isolating Valves
  • Boiler-m8 Air-Master 22mm Air-Separator & Auto Air-Vent
  • Boiler m8 Buildcert/NSF Inhibitor Concentrate 500ml
  • Boiler m8 System Cleaner Concentrate 500ml
  • Boiler-m8 WRAs Approved Electrolytic Scale Reducer 15mm

Bolier-M8 Defender-2 Features:

  • Defends against corrosion of central heating systems
  • High strength removable magnet
  • Easy and fast installation
  • 360 degree diverter - installs on any pipe orientation
  • Quick in-situ servicing - built in vent port
  • Robust twin seal leak-free design
  • PN20 full bore isolation valves
  • Watertight guarantee
  • 5 Year Guarantee

 Bolier-M8 Air-Master Air-Separator Features:

  • Defends against corrosion of central heating systems by removing air created by the heating process
  • Stainless Steel Mesh Baffle
  • Automatic Air-Vent & Vented Cap
  • 360 degree diverter - installs on any pipe orientation
  • 22mm Compression Connections

Bolier-M8 Electrolytic Scale Reducer Features:

Help to protect pipework, boilers and hot water using appliances against the damaging effects of hard scale.

Through the safe release of microscopic quantities of zinc, the Boiler-m8 NeoCal Electrolytic scale reducer has a long lasting effect in promoting the transformation of hard scale particles into numerous tiny needle shaped crystals. These altered “hard” crystals are flushed out through the water system.

  • 5 Year Manufacturers Guarantee
  • No on-going maintenance 
  • 15mm Compression Fittings
  • No chemicals
  • Helps to protect your boiler heat-exchanger from harmful scale deposits
  • Install after your cold water main stop tap for whole house protection
  • Durable nickel plating

Boiler-m8 System Health Inhibitor 500ML Bottle

Adding this treatment to your system via a partially drained radiator, flush machine, filling kit, expansion tank or directly into your Boiler-m8 Defender or Ultimate system filter, will help protect your system from the damaging affects of corrosion and improve your system efficiency. Shake the bottle well and use entire contents.

DOSAGE:

Minimum dose: 500ml per 100 litre system.

SAFETY:

Avoid contact with eyes and skin. Not to be consumed internally. If contact is made, rinse affected areas with clean water.

Pack Contains:

  • 500ML Concentrate Bottle
  • Buildcert Benchmark NSF Approved
  • WRAs Approved

Boiler-m8 System Health Cleaner 500ML Bottle

Adding this treatment to your system via a partially drained radiator, flush machine, filling kit, expansion tank or directly into your Boiler-m8 Defender or Ultimate system filter will help to clean your heating system and improve its efficiency. Shake the bottle well and use entire contents.

DOSAGE:

Minimum dose: 500ml per 100 litre system.

SAFETY:

Avoid contact with eyes and skin. Not to be consumed internally. If contact is made, rinse affected areas with clean water.

Pack Contains:

  • 500ML Concentrate Bottle
  • After treatment bleed radiators to remove any trapped air
  • Circulate in a hot system for a minimum of one hour or up to a week under normal heating cycle
  • Afterwards flush system until water runs clear
  • Add Boiler-m8 Inhibitor once completed to maintain system performance
More Information
Manufacturers Part Number 150-5010
Manufacturer Part Number 150-5010
Condition New
Barcode 5060797371078
Barcode 5060797371078
Manufacturer Boiler-m8
Other top rated products